|
|
|
|
This portable rebar bender was designed by a contractor and allows you to bend steel in place even in tight areas.
- Ideal for standard hook, stirrups and seismic hooks
- Versatile design cannot be trapped against a wall or obstruction. Bending wheel is easily removed without tools
- Costs for couplers, joint welds and inspection delays are greatly minimized
- Saves time by allowing the removal of column forms prior to bending rebar
- Bends #5 5/8-inch (16 mm) rebar to an ACI approved radius
Technical Documentation
|
|
|
|
| Max. Bending Angle |
135 |
| Max. Rebar Size |
#4, #5 |
| Min. Bending Angle* |
5 in |
127 mm |
Min. Bar Spacing
on Center |
2 |
ACI Approved
Max. Bending Angle** |
135 |
ACI Approved
Max. Rebar Size |
#5 |
|
| Overall Length |
23 in |
584 mm |
| Overall Width |
11 in |
279 mm |
| Overall Height |
3.5 in |
89 mm |
| Shipping Dimensions |
24 x 13 x 3.5 in
609.6 x 330.2 x 381 mm
|
| Operating Weight |
22 lb |
10 kg |
| Shipping Weight |
34 lb |
15 kg |
|
All JB Series Rebar Benders require a seperately purchased drive motor to function.
Click below to see Multiquip's availible Drive Motors.
>>JB5135
|
|
| Applications |
90° Standard Hook
180° Cane Hook
Stirrup and Tie Hook
Seismic Stirrup and Tie Hook
Offset Bends
Straightening
|
| Accessories |
hook
bending wheel
10-foot hose with coupler |
|
|
|
|
* Minimum Bend measured from bottom of the machine to the top of the bend angle.
**American Concrete Institute has approved the wheel used in this device as the proper radius for bending the bar size indicated; CRSI requirements are met for the bar size indicated. |
Notice: Features and equipment specifications are subject to change without notice.
