DLW300ESAWR
This welder/generator delivers superior arc characterisitcs and consistent welding quality. It is the quietest welder in the industry with only 59dBA at 23 feet (6.9 meters). The new E-mode feature improves fuel effciency by allowing the operator to weld at idle upto 160 amps. The remote control allows the operator to adjust amperage up to 100 feet (30.5 meters) from the machine.
- Emits only 65dBA at 23 feet (6.9 meters)
- Produces up to 300 amps as a welder, 10.5 kW as a generator
- Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding
- Safety shutdowns, lifting bale, and external water, oil and fuel drains
- Voltage regulation is maintained at 1.5%
- Remote control allow operator to work 100 ft from the welder
- E-mode allows you to weld at 160 amps at idle
- Tier 4 Kubota diesel engine D722
| DC Voltage | CC: 31 V | |
| DC Current | CC: 300A | |
| Current Range | 35-300 A | |
| Max Duty Cycle w/ Full Amps Availible |
100% @280 A | |
| Welding Processes | SMAW FCAW GTAW ACAC |
|
| Fuel Tank Capacity | 9.5 gal | 36 L |
| Fuel Consumption at Rated Load |
0.66 gph | |
| AC Power Output (Single Phase) |
10.5 kW | |
| Cycle | 50/60 Hz | |
| Voltage | 120/240 V | |
| Amperage | 87/44 A | |
| Voltage Regulation | 1.5 % | |
| Receptacles | NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L6-30R 250V Twist-Lock 30A CS-6369 125/250VAC Twist-Lock 50A |
|
**TRLR-MPXF has a built in 28 gal. fuel cell
| Overall Length | 50.75 in | 129 mm |
| Overall Width | 26.75 in | 68 mm |
| Overall Height | 33.1 in | 84 mm |
| Shipping Dimensions |
53 x 30 x 38 in 134.5 x 76 x 95.6 mm |
|
| Operating Weight | 849 lb | 386 kg |
| Shipping Weight | 896 lb | 407 kg |
Notice: Features and equipment specifications are subject to change without notice.
