
DLW330X2
-
The convenience of one man -man or two-man opeation
-
Independent controls and up to 200 amps for each operator or 340 amps for one operator
-
E-mode improves fuel efficiency by allowing the operator to weld with the engine at idle speed at up to 200 amps
-
Arc Force Control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes from sticking during short arc length welding
-
Super clean voltage regulation 1.5% (+/-)
-
Smart Stick sensor to automatically shut off the engine during periods of no load and restart when operator strikes the welding rod
- Tier 4 Kubota diesel engine D902
| DC Voltage | CC: 31.2, 2 x 26.6CCV V | |
| DC Current | CC: 280, 2 x 165 A | CV: 280, 2 x 165 A |
| Current Range | 70-340, 2x35-200 A | |
| Max Duty Cycle w/ Full Amps Availible |
100% @280, 2 x 165 A | |
| Welding Processes | SMAW FCAW GTAW ACAC |
|
| Fuel Tank Capacity | 9.5 gal | 36 L |
| Fuel Consumption at Rated Load |
1.1 gph | |
| AC Power Output (Single Phase) |
10.5 kW | |
| Cycle | 60 Hz | |
| Voltage | 120/240 V | |
| Amperage | 87.6/43.8 A | |
| Voltage Regulation | 1.5 % | |
| Receptacles | NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L6-30R 250V Twist-Lock 30A CS-6369 125/250VAC Twist-Lock 50A |
|
| Overall Length | 50.8 in | 129 mm |
| Overall Width | 26.8 in | 68 mm |
| Overall Height | 33.1 in | 84 mm |
| Operating Weight | 893 lb | 446 kg |






