GAW180HE
Multiquip's welder/generators are engineered with a new permanent magnet alternator plus features typically found only on much larger welders.
- Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding.
- Ideal for job site and remote-area service applications
- Produces 50-180 amps for DC welding, 3kW output to power AC tools.
- Operator can draw AC power and weld simultaneously
- Honda GX340 gasoline engine
- Permanent magnet alternator-significantly reduces overall weight compared to other welders in its class
| DC Voltage | CC: 26.8 V | |
| DC Current | CC: 180A | |
| Current Range | 50-180 A | |
| Max Duty Cycle w/ Full Amps Availible |
50% @180 A | |
| Welding Processes | SMAW FCAW GTAW ACAC |
|
| Fuel Tank Capacity | 3.7 gal | 16.8 L |
| Fuel Consumption at Rated Load |
0.93 gph | |
| AC Power Output (Single Phase) |
3 kW | |
| Cycle | 60 Hz | |
| Voltage | 120 V | |
| Amperage | 25 A | |
| Voltage Regulation | 3 % | |
| Receptacles | ||
| Overall Length | 27.5 in | 69.85 mm |
| Overall Width | 22 in | 55.88 mm |
| Overall Height | 23.75 in | 60.3 mm |
| Shipping Dimensions |
28.5 x 23 x 28 in 72.4 x 58.4 x 71.1 mm |
|
| Operating Weight | 225 lb | 102.3 kg |
| Shipping Weight | 239 lb | 108.6 kg |
| Engine Make/Model | Honda GX-340 | |
| Start Method | Electric/Recoil | |
| Engine Power | 9.5 HP | 7.1 kW |
| Engine RPM | 3600 | |
| Fuel Type | Gasoline | |
Notice: Features and equipment specifications are subject to change without notice.
