MTX70SD
Multiquip’s Mikasa MTX-Series rammers are the first to utilize the all new Subaru ER12 engine. The ER12 is high output OHC engine, designed specifically for rammer applications. An innovative sensor monitors engine oil pressure upon start up and during operation. The engine also provides automatic shutdowns in the event the rammer falls over during operation or is left idling for longer than five minutes. A low oil consumption rate helps minimize service intervals.
MTX-Series rammers are renowned for performance and ease of operation. The MTX-Series includes the features most
preferred by contractors such as:
- Cyclonic air cleaners that capture 98% of airborne dust particles
- Long-lasting laminated wood and steel shoe
- Low vibration handles for operator comfort
- Combination hour meter/tachometer
- Durable guards to protect the engine from damage
- Redesigned fuel tank to meet EPA standards for evaporative emmissions
| Blows Per Min. | Up to 690 | |
| Impact Force | 3,350 lbf | 1520 kgf |
| Shoe Jump Height | 3.1 in | 80 mm |
| Shoe Dimensions (LxW) | 13.4 x 11.2 in 340 x 285 mm |
|
| Travel Speed Per Min. | 55.8 ft | 17 m |
| Fuel Tank Capacity | 3.2 qt | 3 L |
| Overall Length | 31.0 in | 788 mm |
| Overall Width | 13.8 in | 365 mm |
| Overall Height | 39.4 in | 1000 mm |
| Operating Weight | 183 lb | 83 kg |
| Engine Make/Model | Subaru ER12 | |
| Start Method | Recoil | |
| Engine Power | 3.4 HP | 2.6 kW |
| Engine RPM | 3,600 | |
| Fuel Type | Gasoline | |
Notice: Features and equipment specifications are subject to change without notice.
